The Importance of Colors of Underground Utility Lines
Underground utilities can easily be identified today. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. If there is a need to dig the ground, it is very important that the utility lines first be identified. The OSHA requires that utilities underground first be located before digging through a piece of land. It is to prevent disaster. If you hit any of the underground utility lines while digging then you can be fatally injured. Services in the area where the lines are located can experience interruption. Before digging their property, people should call 811 to call the utility companies so that these incidents are prevented. When the number is called, you can let the utility companies come out and mark their respective lines.
Marking lines may lessen the risks but there are time when accidents still happen. Utility lines are struck every 6 minutes, some place. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.
GPR or Ground Penetrating Radar is used by companies to locate their utility lines. When locating utility lines underground, this machine makes it easy to do so. Companies can locate their utility lines if any property owner calls 811.
It is easier to identify underground utility lines today because they now use different colors for each utility. Here are the colors used for different utilities.
Proposed excavation sites use white lines. You can mark areas with white lines that will soon be excavated.
Pink lines are temporary survey markings. Surveyors use pink lines to mark off legal property boundaries.
If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. This color is appropriate for electrical works since it is associated with fire and danger.
Lines for gas, oil, steam, petroleum, and gaseous materials use the color yellow. The bright color yellow is used to be a warning sign since a natural gas leak can create a potentially disastrous situation.
Orange lines are used for communication, alarm, signal lines, cable or conduit. Blue lines are used for potable water. If you see purple lines, that this is for reclaimed water, irrigation and slurry lines. Green lines are used for sewer and drain lines. You can derail any project for a long time if you hit these lines.